🧗 Service 09 of 10
High-Rise Rope Access Cleaning
IRATA-certified technicians suspended at any height — cleaning glass facades, external walls, rooftops, and building envelopes safely and efficiently without scaffolding.
IRATA
Certified Technicians
Any Height
No Floor Limit
No Scaffolding
Faster & Cheaper
DOSH
Compliant Works
What We Offer
Types of Rope Access Services
Glass Facade Cleaning
Full-height exterior glass curtain wall cleaning using purified water systems and squeegees — streak-free results at any storey level.
See Pricing ↓Exterior Wall Washing
High-pressure and soft washing of concrete, cladding, aluminium panels, and painted facades — removing algae, moss, staining, and pollution build-up.
See Pricing ↓Rooftop & Parapet Cleaning
Roof deck debris clearing, parapet wall cleaning, roof drain unblocking, and green algae removal from flat roof surfaces.
See Pricing ↓Facade Inspection & Repair
Visual and tap-hammer inspection of external facades, tile debonding checks, sealant joint inspections, and minor crack sealing at height.
See Pricing ↓High-Rise Window Cleaning
Individual unit window and frame cleaning for condominiums, hotels, and office towers — interior and exterior access via rope.
See Pricing ↓Building Envelope Maintenance
Sealant replacement, expansion joint re-sealing, caulking at window and curtain wall perimeters, and waterproofing touch-ups at height.
See Pricing ↓Scope of Work
What's Included in Every Assignment
Pre-job site risk assessment & HIRARC
Method statement & anchor point inspection
Certified IRATA rope technicians on every job
Double rope system (working + safety line)
Ground exclusion zone & signage setup
Purified water fed pole or manual cleaning
Eco-safe biodegradable cleaning agents
Equipment inspection log before every descent
DOSH-compliant work at height documentation
Post-job completion report with photos
Safety & Compliance
Certified. Insured. DOSH-Compliant.
🏅
IRATA International Certification
All our rope access technicians hold valid IRATA (Industrial Rope Access Trade Association) cards — the internationally recognised standard for industrial rope access. Technicians are graded Level 1, 2, or 3 with regular re-assessment every 3 years.
Level 1–3 Technicians🛡️
DOSH Work at Height Compliance
All high-rise work is conducted under Malaysia's Department of Occupational Safety and Health (DOSH) Work at Height Regulations 2013 — including mandatory HIRARC risk assessments, method statements, and anchor point load calculations before any descent.
OSHA 1994 Compliant📋
CIDB Green Card Holders
All site workers are registered CIDB Green Card holders, fulfilling the mandatory site safety training requirements for Malaysia's construction and maintenance industry. Green cards are verified before deployment on every job.
CIDB Registered💼
Public Liability Insurance
MKW Global carries comprehensive public liability and workmen's compensation insurance for all rope access operations. Building owners and JMBs are protected against third-party claims arising from our operations on their premises.
Fully InsuredWho We Serve
Buildings We Work On
Office Towers
Glass curtain walls, aluminium panels, and concrete facades at any height
Hotels & Serviced Apartments
Window cleaning, facade washing, and balcony gutter clearing
Condominiums
External window cleaning, water feature maintenance, and facade inspection
Industrial Facilities
Warehouse rooftops, silos, tanks, and elevated structure cleaning
Retail & Shopping Malls
Signage cleaning, atrium glass, and shopfront canopy washing
Hospitals & Institutions
External facade and window maintenance with minimal operational disruption
Religious Buildings
Dome, minaret, and spire cleaning where conventional access is impossible
Bridges & Structures
Structural inspection, cleaning, and minor maintenance at inaccessible heights
How It Works
Our 6-Step Rope Access Process
1
Site Survey & Risk Assessment
Our supervisor visits the building to assess facade type, anchor point locations, building height, surrounding hazards, and access restrictions. A HIRARC risk assessment and method statement are prepared.
2
Quotation & Scheduling
A detailed quotation covering team size, equipment, cleaning agents, and working days is submitted. Scheduling accounts for weather windows — rope access work is suspended in winds above 40 km/h or active rainfall.
3
Anchor Point Setup & Equipment Check
Roof anchors are inspected and load-rated. A full pre-use equipment check is conducted — ropes, descenders, harnesses, helmets, and communication devices. Ground exclusion zone is barricaded and signposted.
4
Rope Access Cleaning Operations
Technicians descend on a working rope and independent safety line. Cleaning is performed systematically from top to bottom in defined work zones. Ground team monitors and manages ropes, water supply, and communications throughout.
5
Quality Check & Re-Work Passes
Supervisor inspects completed sections from ground level and via binoculars. Any missed areas or streaking are immediately addressed with a re-pass before the day's ropes are packed down.
6
Derig, Documentation & Handover
All equipment is retrieved, ground barriers removed, and the site left clean. A completion report with before-and-after photos, team roster, and IRATA card copies is submitted to the building manager.
Our Work
Rope Access Operations Gallery
★★★★★
"MKW Global cleaned the entire 38-storey glass facade of our commercial tower in 6 working days. Their IRATA paperwork was complete before they arrived on site, the ground safety setup was professional, and the glass was spotless. Our JMB has been using them for the annual facade wash for three consecutive years."
Encik Suhaimi Razak
Building Manager, Kuala Lumpur City Centre
Got Questions?
Frequently Asked Questions
What is IRATA and why does it matter?
IRATA (Industrial Rope Access Trade Association) is the internationally recognised body that sets training and operational standards for rope access work. IRATA Level 1 technicians can operate under supervision, Level 2 can work independently, and Level 3 supervisors oversee operations and write method statements. In Malaysia, DOSH Work at Height Regulations require that all rope access work be conducted by trained and competent persons — IRATA certification is the accepted evidence of competency. Always ask to see the technician's IRATA card before work begins.
Is rope access safe? How is it different from abseiling?
Industrial rope access is statistically one of the safest methods of working at height — IRATA's global incident data consistently shows a lower rate of lost-time injuries than scaffolding. It is different from recreational abseiling in that technicians use a two-rope system: a working rope and an independent safety rope with a fall arrest device. If the working rope fails, the safety line holds. Work is also never performed alone — a ground support team is always present for the full duration of the operation.
What weather conditions stop rope access work?
Rope access operations are suspended when wind speeds exceed 40 km/h at working height, during active rain, lightning, or when visibility is poor. In Malaysia, afternoon thunderstorms are common — we typically plan high-rise operations for early morning starts (7:00–7:30 AM) to maximise safe working hours before afternoon weather deteriorates. Weather holds are factored into project scheduling and do not incur additional charges.
Do you need access to the roof of my building?
Yes — roof access is required to install and rig the anchor system from which technicians descend. We coordinate with your building management or JMB for roof access. For buildings with no existing certified anchor points, we can design and install temporary anchor systems rated to the required load. All anchor setups are inspected by our IRATA Level 3 supervisor before any descent.
How long does it take to clean a high-rise building?
Duration depends on building height, facade area, surface type, and team size. A typical 20-storey residential tower takes 3–5 working days with a 4-person team. A 40-storey commercial tower with a full glass curtain wall may take 8–14 days. We provide a detailed work programme with daily targets after the site survey, so building management knows exactly what to expect each day.
How often should a building's facade be cleaned?
In Malaysia's tropical climate — high humidity, pollution, and monsoon rains — most commercial facades accumulate visible soiling within 6–12 months. Glass curtain walls are typically cleaned every 6 months, while concrete and cladding facades are usually washed annually. Beyond aesthetics, regular cleaning prevents acid rain etching on glass, algae root damage to sealant joints, and corrosion of aluminium frames. We recommend setting up an annual maintenance contract to lock in scheduling and pricing.